DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
218
Click the Find button to find and display an entry based on the information entered.
Click the Edit button to configure the interval settings for the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the fields that can be configured are described below:
Parameter Description
MinTxInt
Enter the minimum time interval value that the local system will use when
transmitting BFD control packets here. The range is from 50 to 1000 milliseconds.
MinRxInt
Enter the minimum time interval value between received BFD control packets that
this system is capable of supporting here. The range is from 50 to 1000
milliseconds.
Multiplier
Enter the BFD detection time multiplier value here. The range is from 3 to 99.
Slow Time
Enter the BFD slow time value here. The range is from 1000 to 3000 milliseconds.
Click the Apply button to accept the changes made.
BFD Neighbor Table
This window is used to display the BFD neighbor table.
To view the following window, click L3 Features > BFD > BFD Neighbor Table, as shown below:
Figure 6-40 BFD Neighbor Table Window
Click the Show Detail button to view more detailed information for the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following page will appear.
Figure 6-41 BFD Neighbor Table (Show Detail) Window
Click the Back button to return to the previous window.
To Next Page
Loading...
