D-Link DXS-3400 SERIES - IP Route Filter; Route Map

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
219
IP Route Filter
Route Map
This window is used to display and configure the route map’s settings.
To view the following window, click L3 Features > IP Route Filter > Route Map, as shown below:
Figure 6-42 Route Map Window
The fields that can be configured are described below:
Parameter Description
Route Map Name
Enter the route map’s name here. This name can be up to 16 characters long.
Direction
Select the direction for this rule here. Options to choose from are Permit and
Deny.
• Permit - Specifies that routes that match the rule entry are permitted.
• Deny - Specifies that routes that match the rule entry are denied.
Sequence ID
Enter the sequence ID for this rule here. The range is from 1 to 65535.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button in the Match Clauses column, the following page will appear.