D-Link DXS-3400 SERIES - Dhcp Server Manual Binding

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
51
Parameter Description
m-node system broadcasts first, and then queries the name server. A hybrid
system queries the name server first, and then broadcasts.
Lease
Enter and select the lease time for an IPv4 address that is assigned from the
address pool here. Enter the Days in the range from 0 to 365. Select the Hours
and Minutes from the drop-down menus. Alternatively, the Infinite option can be
selected to specify that the lease time is unlimited.
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
DHCP Server Exclude Address
This window is used to display and exclude a range of IPv4 addresses from being allocated to the DHCP client. The
DHCP server automatically allocates addresses in DHCP address pools to DHCP clients. All the addresses except the
interface’s IP address on the router and the excluded address(es) specified here are available for allocation. Multiple
ranges of addresses can be excluded. To remove a range of excluded addresses, administrators must specify the
exact range of addresses previously configured.
To view the following window, click Management > DHCP > DHCP Server > DHCP Server Exclude Address, as
shown below:
Figure 4-33 DHCP Server Exclude Address Window
The fields that can be configured are described below:
Parameter Description
Begin Address
Enter the first IPv4 address of a range of addresses to be excluded here.
End Address
Enter the last IPv4 address of a range of addresses to be excluded here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
DHCP Server Manual Binding
This window is used to display and configure the DHCP server feature’s manual binding settings. With a manual
binding entry, the IP address can be either be bound with a client-identifier or bound with the hardware address of the
host.
To view the following window, click Management > DHCP > DHCP Server > DHCP Server Manual Binding, as
shown below: