DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
195
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will be available.
Figure 6-8 IPv4 Interface (Edit) Window
The fields that can be configured are described below:
Parameter Description
State
Select to enable or disable the IPv4 interface’s global state.
IP MTU
Enter the MTU value here. The range is from 512 to 16383 bytes. By default, this
value is 1500 bytes.
IP Directed Broadcast
Select to enable to disable the IP directed broadcast feature here. This parameter
is used to enable or disable the conversion of IP directed broadcasts received by
the interface to physical broadcasts when the destination network is directly
connected to the Switch.
Description
Enter the description for the interface.
Get IP From
Select the get IP from option here. Options to choose from are Static and DHCP.
• When the Static option is selected, users can enter the IPv4 address of this
interface manually in the fields provided.
• When the DHCP option is selected, this interface will obtain IPv4 information
automatically from the DHCP server located on the local network.
IP Address
Enter the IPv4 address for this interface here.
Mask
Enter the IPv6 subnet mask for this interface here.
Secondary
Tick this option to use the IPv4 address and mask as the secondary interface
configuration.
Click the Back button to return to the previous window.
To Next Page
Loading...
