D-Link DXS-3400 SERIES - Page 339

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
329
Figure 9-52 IP Source Guard Binding Window
The fields that can be configured in IP Source Binding Settings are described below:
Parameter Description
MAC Address
Enter the MAC address of the binding entry here.
VID
Enter the VLAN ID of the binding entry here.
IP Address
Enter the IP address of the binding entry here.
Unit
Select the Switch unit that will be used for this configuration here.
From Port ~ To Port
Select the appropriate port range used for the configuration here.
Click the Apply button to accept the changes made.
The fields that can be configured in IP Source Binding Entry are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this query here.
From Port ~ To Port
Select the appropriate port range used for the query here.
IP Address
Enter the IP address of the binding entry here.
MAC Address
Enter the MAC address of the binding entry here.
VID
Enter the VLAN ID of the binding entry here.
Type
Select the type of binding entry to find here. Options to choose from are All,
DHCP Snooping, and Static.
• Selecting All specifies that all the DHCP binding entries will be displayed.
• Selecting DHCP Snooping specifies to display the IP-source guard binding
entry learned by DHCP binding snooping.
• Selecting Static specifies to display the IP-source guard binding entry that is
manually configured.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.