DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
409
Figure 11-16 Mirror Settings Window
The fields that can be configured for RSPAN VLAN Settings are described below:
Parameter Description
VID List
Enter the VLAN list’s ID(s) that will be associated with this configuration here.
Click the Add button to add the VLAN(s) to the configuration.
Click the Delete button to delete the VLAN(s) from the configuration.
The fields that can be configured for Mirror Settings are described below:
Parameter Description
Session Number
Select the mirror session number for this entry here. This number is between 1
and 4.
Destination
Tick the checkbox, next to the Destination option, to configure the destination for
this port mirror entry.
In the first drop-down menu select the destination type option. Options to choose
from are Port and Remote VLAN.
• Port - After selecting this option, select the Switch’s unit ID and destination
port number from the drop-down menus.
• Remote VLAN - After selecting this option, select the Switch’s unit ID and
destination port number from the drop-down menus and enter the VID in the
space provided. The VID must be between 2 and 4094.
Source
Tick the checkbox, next to the Source option, to configure the source for this port
mirror entry.
In the first drop-down menu select the source type option. Options to choose from
are Port, ACL, VLAN, and Remote VLAN.
• Port - After selecting this option, select the Switch’s unit ID, From Port and
To Port numbers from the drop-down menus. Lastly select the Frame Type
option from the last drop-down menu. Options to choose from are Both, RX,
TX, and TX Forwarding. When selecting Both, traffic in both the incoming
and outgoing directions will be mirrored. When selecting RX, traffic in only
the incoming direction will be mirrored. When selecting TX, traffic in only the
To Next Page
Loading...
