D-Link DXS-3400 SERIES - Page 465

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
455
Log Description Severity
mac-address: the host MAC addresses.
interface-id: the interface on which the host is authenticated.
vlan-id: the VLAN ID on which the host exists.
Event description: the host has aged out.
Log Message: MAC-based Access Control host aged out (MAC: <mac-address>,
<interface-id>, VID: <vlan-id>).
Parameters description:
mac-address: the host MAC addresses.
interface-id: the interface on which the host is authenticated.
vlan-id: the VLAN ID on which the host exists.
Informational
Event description: the host failed to pass the authentication.
Log Message: MAC-based Access Control host login fail (MAC: <mac-address>,
<interface-id>, VID: <vlan-id>).
Parameters description:
mac-address: the host MAC addresses.
interface-id: the interface on which the host is authenticated.
vlan-id: the VLAN ID on which the host exists.
Critical
Event description: the authorized user number on the whole device has reached the
maximum user limit.
Log Message: MAC-based Access Control enters stop learning state..
Warning
Event description: the authorized user number on the whole device is below the maximum
user limit in a time interval.
Log Message: MAC-based Access Control recovers from stop learning state.
Warning
Event description: the authorized user number on an interface has reached the maximum
user limit.
Log Message: <interface-id> enters MAC-based Access Control stop learning state
Parameters description:
interface-id: the interface on which the host is authenticated.
Warning
Event description: the authorized user number on an interface is below the maximum user
limit in a time interval.
Log Message: <interface-id> recovers from MAC-based Access Control stop learning
state.
Parameters description:
interface-id: the interface on which the host is authenticated.
Warning
MSTP Debug Enhancement
Log Description Severity
Event description: Topology changed.
Log Message: Topology changed [( [Instance:<InstanceID> ] ,port:< portNum> ,MAC:
<macaddr>)]
Parameters description:
InstanceID: Instance ID.
portNum: Port ID
macaddr: MAC address
Notice
Event description: Spanning Tree new Root Bridge
Log Message: [CIST | CIST Regional | MSTI Regional] New Root bridge
selected( [Instance: <InstanceID> ]MAC: <macaddr> Priority :<value>)
Parameters description:
Informational