D-Link DXS-3400 SERIES - Page 471

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
461
Log Description Severity
Unicast> storm.
Parameters description:
interface-id: The interface ID on which is error-disabled by storm.
Broadcast: The interface is disabled by broadcast storm.
Multicast: The interface is disabled by multicast storm.
Unicast: The interface is disabled by unicast storm (including both known and unknown
unicast packets).
Telnet
Log Description Severity
Event description: Successful login through Telnet.
Log Message: Successful login through Telnet (Username: <username>, IP: <ipaddr>)
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Informational
Event description: Login failed through Telnet.
Log Message: Login failed through Telnet (Username: <username>, IP: <ipaddr>)
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Warning
Event description: Logout through Telnet.
Log Message: Logout through Telnet (Username: <username>, IP: <ipaddr>)
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Informational
Event description: Telnet session timed out.
Log Message: Telnet session timed out (Username: <username>, IP: <ipaddr>).
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Informational
VRRP Debug Enhancement
Log Description Severity
Event description: One virtual router state becomes Master.
Log Message: VR <vr-id> at interface <intf-name> switch to Master
Parameters description:
vr-id: VRRP virtual router ID.
intf-name: Interface name on which virtual router is based.
Informational
Event description: One virtual router state becomes Backup.
Log Message: VR <vr-id> at interface <intf-name> switch to Backup
Parameters description:
vr-id: VRRP virtual router ID.
intf-name: Interface name on which virtual router is based.
Informational
Event description: One virtual router state becomes Init.
Log Message: VR <vr-id> at interface <intf-name> switch to Init
Informational