95XF series Inspection and adjustment
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
3-43
3.32 CHECKING THE OIL AND GREASE LUBRICATED HUBS FOR LEAKS
If leaks occur in oiled wheel hubs, the wheel hub
should be refilled to the correct level – once the
leak has been repaired – see “Draining and
filling”.
If leaks occur in greased wheel hubs, the
bearing grease should be checked. If necessary,
the grease should be replaced by grease of the
correct specification -once the leak has been
repaired-, see specification manual “Fluids and
lubricants”.
3.33 CHECKING THE DIFFERENTIAL FOR LEAKS
1. Visually inspect the differential for leaks.
3.34 CHECKING THE GEARBOX FOR LEAKS
1. Visually check the gearbox for leaks.
3.35 CHECKING THE RETARDER FOR LEAKS
1. Visually inspect the retarder for leaks.
3.36 CHECKING THE OIL LEVEL OF THE CENTRAL AXLE OF THE TANDEM
UNIT
1. Remove the level check/filler plug.
2. The oil level must reach the rim of the level
check/filling opening.
M8029
5
200424
To Next Page
Loading...
