95XF series Draining and filling
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
5-7
5.4 DRAINING AND FILLING, DIFFERENTIAL
To prevent skin injury, avoid
unnecessary contact with the
drained oil.
1347 axle
Draining the differential
1. Position the vehicle on a level surface.
2. Remove the level check/filler plug (A) and
drain plug (B) and drain the oil.
Filling the differential
1. Position the vehicle on a level surface.
2. Fit the drain plug (B) using the special torx
spanner (DAF no. 1329422) and tighten it to
the s pecified torque. See ”Technical data”.
3. Fill the differential with the specified quantity
of oil. See ”Technical data”.
4. Check the oil level after approximately 5
minutes. See ”Inspection and adjustment”.
5. Fit the level check/filler plug (A) ) using the
special torx wrench (DAF no.1329422) and
tighten the plug to the specified tightening
torque. See ”Technical data”.
M8013
A
B
5
200424
To Next Page
Loading...
