DAF 95XF - Page 166

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
Draining and filling 95XF series
5-8
1354 axle
Draining the differential
1. Position the vehicle on a level surface.
2. Lower the trailing axle, if present, on a
leaf--sprung version.
3. Remove the level check/filler plug (A) and
drain plug (B) and drain the oil.
Filling the differential
1. Position the vehicle on a level surface.
2. Fit the drain plug (B) using the special torx
spanner (DAF no. 1329422) and tighten it to
the s pecified torque. See ”Technical data”.
3. Fill the differential with the specified quantity
of oil. See ”Technical data”.
4. Check the oil level after approximately 5
minutes. See ”Inspection and adjustment”.
5. Fit the level check/filler plug (A) ) using the
special torx wrench (DAF no.1329422) and
tighten the plug to the specified tightening
torque. See ”Technical data”.
B
A
M8048
5
 200424