DAF 95XF - Removal and Installation, Steering Gear Filter Element

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
Removal and installation 95XF series
4-20
4.13 REMOVAL AND INSTALLATION, STEERING GEAR FILTER ELEMENT
1. Clean the reservoir cover, so that absolutely
no dirt can get into the reservoir.
2. Remove the cover (3), turn filter holder (5) a
quarter turn and remove the filter holder
containing the filter element (6) carefully
from the reservoir, so that no dirt from the
filter element can get into the reservoir.
3. Remove the filter element from the filter
holder.
4. Fit a new filter element on the holder and
install the filter holder containing the filter in
the reservoir. Make sure that the filter holder
engages in its locking element.
5. Check the seal (4) on the cover (3) and fit
the c over.
6. Check the fluid level using the dipstick (2),
see c hapter “Inspection and adjustment”.
M7002
6
3
4
5
1
2
5
 200424