DAF 95XF - Explanatory Notes on the Maintenance Schedule

MAINTENANCE SCHEDULE
Maintenance intervals 95XF series
1-2
1.2 EXPLANATORY NOTES ON THE MAINTENANCE SCHEDULE
MAINTENANCE GROUP CLASSIFICATION
Depending upon the use to which the vehicle is
put, the vehicle is placed in maintenance group
I, II or III.
Maintenance group I
Operation on building sites, in quarries, etc.
- Operation on unmetalled roads
- Operation in dusty environments
- Sanitation department vehicles
- Distribution transport with an annual
mileage up to 30,000 km.
Maintenance group II
Urban and regional transport
- Distribution transport in cities
- Traffic between adjacent villages/cities
Maintenance group III
(Inter)national traffic
- Long-distance/very long-distance transport
STANDARD CHANGING INTERVAL
This is the symbol for the standard changing
interval. See ”Fluids and lubricants”
specifications manual for prescribed oil
specification.
G000089
M
EXTENDED CHANGING INTERVAL
This is the extended changing interval symbol.
If the prescribed oil specification and any
additional conditions (see specification manual
”Fluids and lubricants”) have to be complied
with, an extended changing interval may be
applied.
Note:
An extended engine oil changing interval is not
allowed for the VF and XE engines.
S
G000077
4
 200424