95XF series Inspection and adjustment
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
3-29
9. Measure the play “A” between the thrust
sleeve and the bracket using a feeler
gauge. Compare the measured play with
the maximum allowable steering ball joint
play. See “Technical data”.
If necessary, replace the steering ball joint.
3.21 CHECKING THE BRAKE COMPONENTS/BRAKE SYSTEM FOR LEAKS
While operating the service brake, check
whether any leaks occur in the brake system.
If the brake system of a vehicle has been
charged to the maximum pressure, it should
generally be possible to drive the vehicle after a
period of 16 hours of uninterrupted standstill,
without having t o first charge the brake system
to sufficient operating pressure.
This comes down to a maximum pressure drop
of approx. 0.4 bar per hour at a normal system
pressure.
Note:
Auxiliary consumers and accessories must
always be connected to circuit 4.
5
200424
To Next Page
Loading...
