EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
Inspection and adjustment 95XF series
3-44
3.37 CHECKING THE OPERATION OF THE DIFFERENTIAL LOCK
1. Jack up the rear axle and support it on
stands.
2. Bring the air system to operating pressure.
3. Engage the differential lock. The warning
lamp should now come on.
4. Check whether there is a “rigid” connection
between the driven wheels.
5. Disengage the differential lock. The warning
lamp should not light up and the “rigid”
connection between the driven wheels
should be broken.
M8031
3.38 CHECKING THE FLUID LEVEL IN THE HYDRAULIC LIFTING GEAR
1. Make sure t hat the trailing axle wheels are
fully lowered and on the ground.
2. Check the fluid level.
The f luid level must be between the “min.”
and “max.” level marks. If necessary, top
up.
5
200424
To Next Page
Loading...
