95XF series Lubrication
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
7-3
Lubricating the propeller shaft
1. Lubricate the universal joints of the
propeller shaft, until grease comes out.
2. The maximum lubricating pressure should
not exceed 15 bar.
M9030
Lubrication of king pins
1. To make sure that the grease can penetrate
adequately, the king pins should be
lubricated in unloaded condition.
The f ront axle should therefore be
completely jacked up.
2. Lubricate the king pins until grease comes
out.
M9025
Fifth wheel
1. Clean the surface of the fifth wheel and
apply clean grease.
M9024
5
200424
To Next Page
