Dahua DHI-NVR5208-4KS2 - Navigation Bar

Local Basic Operation 127
Table 4-16
SN
Icon
Description
1
When current channel is recording, system displays this icon.
2
When motion detection alarm occurs, system displays this icon.
3
When video loss alarm occurs, system displays this icon.
4
When current channel is in monitor lock status, system displays this
icon.
5
When the device connects to the network camera remotely, system
displays this icon.
This function is for some series products only.
4.3.2 Navigation bar
You can quickly perform operation through the icon on the navigation bar.
 Different series products may display different navigation bar icons. Refer to the actual
product for detailed information.
 Select Main Menu > SYSTEM > GENERAL > General to enable navigation bar function
and then click Apply; otherwise you cannot see the following interface.
Step 1 On the preview interface, left click mouse,
You can see navigation bar. See Figure 4-62. Refer to Table 4-17 to view detailed
information.
Figure 4-62
Table 4-17
Icon
Function
Open Main Menu.
Expand or condense the navigation bar.
Select view layout.
Go to the previous screen.