Local Basic Operation 75
Step 9 Device goes to startup wizard interface. Refer to "4.1.4 Quick Settings" for detailed
information.
4.1.3 Reset Password
You can reset the password by the following methods when you forgot the password for admin
account.
If the password reset function is enabled, you can use mobile phone to scan the QR code to
reset the password. For details, see "4.1.3.2 Resetting Password on Local Interface."
If the password reset function is disabled, there are two situations:
If you configured security questions, you can reset the password by the security
questions.
If you did not configure the security questions, you can only use the reset button on the
mainboard to restore the Device to factory default.
Reset button is for some series product only.
4.1.3.1 Enabling Password Reset Function
After enabling password reset function, you can scan QR code on the local menu to reset
password.
Step 1 Select Main Menu > Account > Reset Password.
The Reset Password interface is displayed. See Figure 4-5.
Figure 4-5
To Next Page
Loading...
Need help?
General
