Local Basic Operation 314
Click to modify corresponding user information, click to delete current user.
4.16 Output and Display
4.16.1 Display
You can configure the display effect such as displaying time title and channel title, adjusting
image transparency, and selecting the resolution.
Step 1 Select Main Menu > DISPLAY > Display.
The Display interface is displayed. See Figure 4-247.
Figure 4-247
Step 2 Configure the settings for the display parameters. See Table 4-70.
Table 4-70
Set the transparency of the local menu of the NVR device. The higher
the transparency, the more transparent the local menu.
Time
Display/Channel
Display
Select the check box and the date and time of the system will be
displayed in the preview screen.
Select the check box to optimize the preview image edges.