Local Basic Operation 317
Display all channel groups under the current Window Split setting.
Add a channel group: Click Add, in the pop-up Add Group
channel, select the channels to form a group, and then click
Save.
Delete a channel group: Select the check box of any channel
group, and then click Delete.
Edit a channel group: Select the check box of any channel group
and then click Modify, or double-click on the group. The Modify
Channel Group dialog box is displayed. You can regroup the
channels.
Click Move up or Move down to adjust the position of channel
group.
Step 3 Click Apply to save the settings.
4.16.3 Customized Display
You can set customized video split mode.
This function is for some series products. Refer to the actual product for detailed
information.
Device max. supports 5 customized videos.
Step 1 Select Main Menu > DISPLAY > Custom Split.
The Custom Split interface is displayed. See Figure 4-249.
Figure 4-249
Step 2 Click and then click to select basic mode.
To Next Page
Loading...
