Local Basic Operation 157
Figure 4-97
Step 3 Click Backup to begin the process.
4.6.3 Smart Search Playback
This function is for some series product only.
During playback process, it can analyze the motion detect zone in the scene and give the
analysis result.
This function is for channel that already enabled motion detect function (Main Menu > ALARM >
VIDEO DETECT > Motion Detect).
Step 1 Select a channel to playback video and then click . You can view the grids on the
playback video.
This function is for one-channel playback mode.
If you are in multiple-channel playback mode, double-click a channel first to switch
to one-channel playback mode.
Step 2 Left click mouse and then drag to select smart search zones(22*18（PAL）, 22*15
（NTSC）).
Step 3 Click to go to smart search and playback. System is going to playback all motion
detect record footages.
Step 4 Click again to stop smart search function.
To Next Page
Loading...
Need help?
General
