EasyManuals Logo

Dahua DHI-NVR5208-4KS2 User Manual

Dahua DHI-NVR5208-4KS2
361 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #284 background imageLoading...
Page #284 background image
Local Basic Operation 273
The system pops up a message to indicate the successfully saved. The IP address
appears on the PPPoE interface. You can use this IP address to access the Device.
When the PPPoE function is enabled, the IP address on the TCP/IP interface cannot be
modified.
4.12.4 DDNS
When the IP address of the Device changes frequently, the DDNS function can dynamically
refresh the correspondence between the domain on DNS and the IP address, ensuring you
access the Device by using the domain.
Preparations
Ensure the Device supports the DDNS Type and log in the website provided by the DDNS
service provider to register the information such as domain from PC located in the WAN.
After you have registered and logged in the DDNS website successfully, you can view the
information of all the connected devices under this user name.
Step 1 Select Main Menu > NETWORK > DDNS.
The DDNS interface is displayed. See Figure 4-205.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dahua DHI-NVR5208-4KS2 and is the answer not in the manual?

Dahua DHI-NVR5208-4KS2 Specifications

General IconGeneral
BrandDahua
ModelDHI-NVR5208-4KS2
CategoryNetwork Hardware
LanguageEnglish

Related product manuals