ESS Series User’s Manual
Important Safeguard and Warnings
1．Electrical Safety
All installation and operation should conform to your local electrical safety codes.
The product must be grounded to reduce the risk of electric shock.
We assume no liability or responsibility for all the fires or electric shock caused by improper
handling or installation.
2．Installation
Keep upward. Handle with care.
Do not apply power to the unit before completing installation.
3．Qualified Engineers Needed
All installation here should be done by the qualified engineers.
All the examination and repair should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
4．Environment
The server shall be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
5． Maintenance
Disconnect all power-supply before opening upper lid or maintenance in case of getting shock.
Please replace the lithium battery of the same model after the old lithium battery got damaged.
6. About Accessories
Be sure to use all the accessories recommended by manufacturer.
Contact you local retailer ASAP if something is missing or damaged in your package.
7. Disk Replacement
When replace the disk, please make sure you are using the same model from the same
manufacturer and of the same capacity!
To Next Page
Loading...
General