Daikin DPS - Points 25-27 (with Ids); Points 28-30 (with Ids)

Points 25-27 (With IDs)
Trending Points 25 through 27 can be freely selected all
the available points and point members that exist within the
controller. In this case the user must know and enter the point
ID number, point Type number and point Member number.
Factory assistance will generally be necessary to indentify this
information for a specic point.
Table 57: Points 25-27 (With IDs)
Points 28-30 (With IDs)
Trending Points 28 through 30 can be freely selected all
the available points and point members that exist within the
controller. In this case the user must know and enter the point
ID number, point Type number and point Member number.
Factory assistance will generally be necessary to indentify this
information for a specic point.
Table 58: Points 28-30 (With IDs)
Item Display
Name
Default
Setting
Range
Password
Level
Point 25
ID= F0AF0000
00000000–
FFFFFFFF
2
Type= 0000 0000–FFFF 2
Mem Num= 0100 0000–FFFF 2
Point 26
ID= F0AF0000
00000000–
FFFFFFFF
2
Type= 0000 0000–FFFF 2
Mem Num= 0100 0000–FFFF 2
Point 27
ID= F0AF0000
00000000–
FFFFFFFF
2
Type= 0000 0000–FFFF 2
Mem Num= 0100 0000–FFFF 2
Item Display
Name
Default
Setting
Range
Password
Level
Point 28
ID= F0AF0000
00000000–
FFFFFFFF
2
Type= 0000 0000–FFFF 2
Mem Num= 0100 0000–FFFF 2
Point 29
ID= F0AF0000
00000000–
FFFFFFFF
2
Type= 0000 0000–FFFF 2
Mem Num= 0100 0000–FFFF 2
Point 30
ID= F0AF0000
00000000–
FFFFFFFF
2
Type= 0000 0000–FFFF 2
Mem Num= 0100 0000–FFFF 2
trendIng
www.DaikinApplied.com 71 OM 1141-3 • MICROTECH UNIT CONTROLLER