Instruction SiEBE18-526
168 System Configuration
2.2.5 AUTO · DRY · COOL · HEAT · FAN Operation
C
TEMP
ON/OFF
POWERFUL
HOME LEAVE
MODE
TIMER
FAN
SWING
SILENT
SENSOR
ON
CANCEL
OFF
2, 3
1
4
5
ON
OFF
C
AUTO · DRY · COOL · HEAT · FAN Operation
The air conditioner operates with the operation mode of your
choice.
From the next time on, the air conditioner will operate with the
same operation mode.
To start operation
1. Press “MODE selector button”
and select a operation mode.
• Each pressing of the button advances the
mode setting in sequence.
: AUTO
: DRY
: COOL
: HEAT
: FAN
<FTKS>
<FTXS>
2. Press “ON/OFF button”.
• The OPERATION lamp lightsup.
To stop operation
3. Press “ON/OFF button” again.
• Then OPERATION lamp goes off.
To change the temperature setting
4. Press “TEMPERATURE adjustment button”
DRY or FAN mode
The temperature setting is not variable.
AUTO or COOL or HEAT mode
Press “ ” to raise the temperature and press
“” to lower the temperature.
Set to the temperature you like.
To Next Page
Loading...
Need help?
General