Instruction SiEBE18-526
178 System Configuration
FVXS25/35/50B
C
TEMP
ON/OFF
POWERFUL
HOME LEAVE
MODE
TIMER
FAN
SWING
SILENT
ON
CANCEL
OFF
ON
1, 2
Adjusting the Air Flow Direction
You can adjust the air flow direction to increase your
comfort.
To adjust the horizontal
blade (flap)
1. Press “SWING button”.
2. When the flaps have reached the
desired position, press “SWING
button” once more.
The display will go blank.
The flaps will stop moving.
The display will light up and the flaps will
begin to swing.
To adjust the vertical
blades (louvres)
Hold the knoband move the louvre.
(You will find a knob on the left-side and the right-side blades.)
Notes on flap and louvers angle
• Unless [ SWING ] isselected, youshould set the flap at
a near-horizontal angle in HEAT mode and at aupward
position in COOL or DRY mode to obtain the best
performance.
ATTENTION
• When adjusting the flap by hand, turn off the unit, and
use the remote controller to restart the unit.
• Be careful when adjusting the louvres. Inside the air
outlet, a fan is rotating at a high speed.
COOL/DRY
HEAT
To Next Page
Loading...
Need help?
General