Daktronics OMNISPORT 2000 - Setup Numeric Scoreboard Menu; Number of Lines; Score Module; Setup Rtd;Matrix Scoreboard Menu

Water Polo Mode Operation, Menus, & Settings
112
Setup Numeric Scoreboard Menu
This menu congures how the console will display data on a
numeric scoreboard.
Number of Lines
This menu sets the number of lines (1-10) that the scoreboard
displays. The default is 10.
# OF LINES
LINES= ^8
From Main Menu – [3]>[2]>[1]>[1]
Press the [0]–[9] keys to enter the number of lines and then press [ENTER] to save.
Score Module
This menu tells the console whether it will be displaying team
scores on a separate team score module on the numeric
scoreboard, or if the console’s scores will display on the
Lane, Place, Time portion of the numeric scoreboard.
SCORE MODULE-Y
USED? Y/N
From Main Menu – [3]>[2]>[1]>[2]
Press [YES] if a module is used or [NO] if no nodule will be used.
Setup RTD/Matrix Scoreboard Menu
This menu congures how the console will output Real-Time
Data (RTD) to matrix displays.
RTD Offset
This menu will add an offset to the Real-Time Data (RTD)
output to the matrix display.
MENU-RTD/MATRIX
RTD OFFSET: 5K*
From Main Menu – [3]>[2]>[2]>[1]
Use [↑][↓] to toggle through the RTD offset settings (0K, 5K, 10K, or 15K). Each setting adds
5000 to the original item numbers, up to 15000. The default setting is 0K (no offset).
To save the setting, press [ENTER].
When to use this:
• Data from more than one pool/OmniSport 2000 is going to one display.
• If using a Daktronics M2, M3, or V-Link
®
controlled display, this menu allows multiple
RTD inputs directly into the display.
Setup Comm Ports Menu
The following Comm Ports menus select the protocol used
for transmitting data to the display and communicating with
a results program.
MENU-SCOREBOARD
1-NUMERIC
From Main Menu – [3]>[2]
MENU-NUMERIC
1-# OF LINES
MENU-NUMERIC
2-SCORE MODULE
MENU-SCOREBOARD
2-RTD/MATRIX
MENU-RTD/MATRIX
1-RTD/OFFSET
From Main Menu – [3]>[2]>[2]
MENU-SETUP
3-COMM PORTS