Daktronics OMNISPORT 2000 - Setup Printer Menu; Setup Network Menu

Track Mode Menus & Settings
134
Use [←][→] to toggle race logging ON or OFF and then press [ENTER] to save.
When to use this:
• Using the Race Log is the most thorough way to identify issues with the system.
Daktronics recommends that the Race Log is always turned on.
Results
The Results menu selects printouts by LANE or PLACE order.
The results printout format is used for verication and is
usually the preference of the meet management program
operator.
MENU-PRINTER
RSLTS BY: LANE *
From Main Menu – [4]>[4]>[2]
MENU-PRINTER
RSLTS BY: PLACE*
Use [←][→] to select LANE or PLACE and then press [ENTER] to save.
Backups
The Backups menu congures whether or not backup times
will be printed with the race results. Printing backup times is
usually the preference of the meet management program
operator.
MENU-PRINTER
BACKUPS: YES*
From Main Menu – [4]>[4]>[3]
MENU-PRINTER
BACKUPS: NO *
Use [←][→] to select YES (backups enabled) or NO (backups disabled) and then press
[ENTER] to save.
Intensity
This menu sets the printer’s contrast for easy readability.
The typical level is 5.
PRINT INTENSITY
LEVEL 1-5: 5*
From Main Menu – [4]>[4]>[4]
Press the [1]–[5] keys to select the print intensity and press [ENTER] to save.
Setup Time-of-Day Menu
This menu is used to set the console’s date and time.
DATE MM/DD/YY
TOD HH:MM:SS*
From Main Menu – [4]>[5]
Press the [0]–[9] keys to enter the correct date and time and then press [ENTER] to save.
Press [CLEAR] twice to exit without saving and retain the previous time and date.
Setup Network Menu
This menu is used to congure various network settings for
outputting Real-Time Data (RTD) to displays and connecting
to Meet Manager software.
MENU-PRINTER
2-RESULTS
MENU-PRINTER
3-BACKUPS
MENU-PRINTER
4-INTENSITY
MENU-SETUP
5-TIME OF DAY
MENU-SETUP
6-NETWORK