Pace Clock Mode Operation, Menus, & Settings
88
Menu Navigation
Press [MENU] to access the Main Menu screen. The pace
clock mode has ve menus, described in following sections.
The operator may navigate through the menus using the
arrow keys or by pressing the number that precedes the
menu title. To return to the main menu at any time, press [MENU] twice.
• Use [↑][↓] to scroll through the menus. When a selection is made, press [ENTER] to
accept the menu displayed on the right LCD. Pressing an arrow is equivalent to using
a number when in menu mode.
• The second method uses numbers to go directly to a desired menu choice. Using
the [1]–[9] keys, enter the number sequence as shown on the OmniSport 2000 Timing
Console Quick Reference Guide (ED-13584). Daktronics provides a laminated
copy of the quick reference guide; keep it next to the console during a meet for
convenience.
Each operator will nd his/her own method that works best. Remember that when using
either navigation method, pressing [CLEAR] at any time will go back to the previous
function or menu. Pressing the [YES] and [NO] keys is the same as [ENTER] and [CLEAR].
Note: In this manual, LCD illustrations aligned to the right indicate menu location while
the set-up actions are shown on the screens to the left. Each step is illustrated as
the console’s right LCD prompts. The keystrokes to get to the menu shown are
indicated below that menu.
Scoreboard Menu
In the Scoreboard Menu, the operator can turn the
scoreboard output ON or OFF, set the dimming (brightness)
level for Multi-drop displays, and display Time-of-Day on the
scoreboard.
Scoreboard ON/OFF
This menu is used to toggle the scoreboard output ON/OFF.
SCBD IS ON
SET OFF? Y/N
From Main Menu – [1]>[1] or from SCBD ON/OFF Menu [1] or [ENTER]
If the setting is ON, data is sent to a scoreboard. If this setting is OFF, the scoreboard will
be blank until either the start of the next race, or it is turned back ON in the menu.
When to use this:
• The scoreboard is displaying false information due to equipment or operator error
and needs to be blanked.
• The error is corrected and the scoreboard output can be turned back on.
MENU-MAIN
1-SCBD MENU
Main Menu Screen
MENU-SCOREBOARD
1-SCBD ON/OFF
From Main Menu – [1] or [ENTER]
SCBD IS ON
SET ON? Y/N
To Next Page
Loading...
