Daktronics OMNISPORT 2000 - A;S, B;P, C;T, & D;F Keys; Paper Feed; Print Key; Score, Abort, & Edit

Diving Mode Operation, Menus, & Settings
64
Select Order
See A/S, B/P, C/T, & D/F Keys (p.64).
A/S, B/P, C/T, & D/F Keys
These keys are used in two different functions in the diving system.
The rst function is to select which Dive Order is currently being
scored on the console. Press [SELECT ORDER] followed by the
desired key: [A], [B], [C], or [D]. Line two of the right LCD displays
the Dive Order currently selected.
The second function is to select the Dive Position when entering
each dive. The table at right outlines those positions.
Print Key
At any time in the meet, the operator may print the Dive Results, Individual Dive List, or
the All Dive List to the console’s built-in printer. Press [PRINT]>[1, 2, or 3]>[ENTER] for the
desired printout. The printouts are assigned to the following numbers:
[1]=Dive Results
[2]=Individual Dive List
[3]=All Dive List
Refer to Print Menu (p.73) for illustrations of these printouts.
Paper Feed
Press [PAPER FEED] to have the printer advance the paper. The printer will not print on the
advanced lines.
Score, Abort, & Edit
See Operation During Event (p.66) for additional description of when to use these keys.
In order for the console to calculate a score for the dive, the following data is needed:
• Dive #
• Dive Position
• Degree of Difculty (DD)
• Judges’ scores
When pressing [SCORE], the console will determine if a Dive #, Dive Position, and DD
have been pre-programmed, or if it still needs that information. If the console has this
information, it prompts the operator to either manually enter the judges’ scores, or the
judges’ scores will be lled in by the judge consoles. After all the judges’ scores are
displayed, press [SCORE] again to calculate the award for that round and add it on to
the total for that dive.
If the console did not have the Dive #, Dive Position, or DD for that diver and that round,
the console will rst prompt the operator to input the needed information before allowing
the judges’ scores to be entered.
• Press [ABORT] any time after pressing [SCORE] to back out of the Score function
without affecting the Total Score.
• Press [EDIT] to enter the dive information ahead of time, or to change the dive
information entered for the current diver and round.
Dive Position Key
Straight A/S
Pike B/P
Tuck C/T
Free D/F