Daktronics OMNISPORT 2000 - C Menu Navigation Shortcuts

Menu Navigation Shortcuts
159
C Menu Navigation Shortcuts
1-Swimming Menu Navigation
1) SCBD MENU
1-1) SCBD ON/OFF clears the display
1-2) DIMMING sets the dimming (brightness) level of the display
1-3) TIME OF DAY displays the Time-of-Day and time format
2) EDIT MENU
2-1) TEAM SCORE allows editing of team scores
2-2) EVENT ORDER allows editing of event orders
2-2-1) EDIT ORDER edits the event order
2-2-2) INSERT EVENT inserts an event into the order
2-2-3) DELETE EVENT deletes an event
2-2-4) CLEAR ORDER clears the event order
3) PRINT MENU
3-1) RACE RESULTS prints the results of a specic race or a complete meet
3-2) EVENT ORDER prints out the selected event orders
3-3) SETTINGS prints out all congurations entered in the Setup Menu
4) SETUP MENU
4-1) POOL congures the pool settings
4-1-1) # OF LANES sets the number of lanes
4-1-2) LANE ORDER sets the lane order (Normal or Reverse)
4-1-3) LENGTH sets the pool length (25Y, 25M, or 50M)
4-1-4) LANE LABEL sets lane labeling (1-10 or 0-9)
4-2) TIMER congures the timer settings
4-2-1) START IN sets the type of start input (Normally Open or Normally Closed)
4-2-2) LM INPUT sets which end(s) of pool touchpads are located (NEAR or BOTH)
4-2-3) PRIMARY TIME sets input for primary time (TOUCHPAD, BTNS 1 or BTNS 1-3)
4-2-4) FLAG TIME sets the ag time when touchpad is compared to backup time
4-2-5) ARMING DELAY sets the time delay for arming touchpads after a touch
4-2-6) PRECISION sets the timer precision in seconds (1/100 or 1/1000)
4-2-7) RELAY TAKE-OFF congures take-off platforms connections
4-2-8) BEEPER VOLUME sets the volume of the internal beeper
4-3) SCOREBOARD congures the scoreboard settings
4-3-1) NUMERIC sets output data for numeric scoreboards
4-3-1-1) # OF LINES sets the number of lines on the scoreboard
4-3-1-2) SPLT HOLD TIME sets the hold time for display of splits
4-3-1-3) FIN PAGE TIME sets the hold time for nish pages
4-3-1-4) RESULTS ORDER sets order of results (LANE or PLACE)
4-3-1-5) SUBTRACTIVE sets whether to display subtractive splits (YES or NO)
4-3-1-6) SHOW DQ sets what DQ data to display (DQ ONLY or DQ/TIME)
4-3-1-7) SHOW START sets whether to display the start reaction (YES or NO)
4-3-2) RTD/MATRIX sets output data for matrix displays
4-3-2-1) # OF LINES sets the number of lines on the display
4-3-2-2) SPLT HOLD TIME sets the hold time for display of splits
4-3-2-3) FIN PAGE TIME sets the hold time for nish pages
4-3-2-4) RESULTS ORDER sets order of results (LANE or PLACE)
4-3-2-5) SUBTRACTIVE selects whether to display subtractive splits (YES or NO)
4-3-2-6) SHOW DQ sets what DQ data to display (DQ ONLY or DQ/TIME)
4-3-2-7) SHOW START sets whether to display the start reaction (YES or NO)
4-3-2-8) SHOW PLACE sets whether to show place with split times (YES or NO)
4-3-2-9) RTD OFFSET sets how data is sent to display with 2+ consoles or pools
4-4) COMM PORTS congures the communication ports
4-4-1) SCBD OUTPUTS sets the J2/J3 protocol (MULTIDROP, MULTILINE, or OMEGA)