Swimming Mode Menus & Settings
44
#001= EVT: 001 *
RND= (BLANK)
#001= EVT: 001
RND= FINAL *
Using the [0]–[9] keys, enter a distance for the event number and press [ENTER]. If desired,
enter a record time (REC) and press [ENTER] or bypass by pressing [ENTER] again. Entering
a distance of “0” will insert a diving event. Instead of asking for a record time, it will show
the dive order (A, B, C, or D) set for that event.
#001= EVT: 001
DISTANCE= ^100*
#001= EVT: 001
REC: 01:35.27 *
When to use this:
• If the console is not connected to a results program that downloads the event order.
• If the console is not connected to a computer running the OmniSport Pro Swimming
software.
Insert Event
This group of menus is used to insert an event into the event
order.
INSERT BEFORE
#001* E:001 R:P
From-Main Menu – [2]>[2]>[2]
Use [↑][↓] to select the event location number where the new event will be inserted.
Press [ENTER] when the location number is shown.
#001= EVT: 001 *
RND= (BLANK)
Press the [0]–[9] keys to change the Event Number. Use [←][→] to change the event’s
alpha designator and press [ENTER] to accept. Use [←][→] to change the round type
(nal, semi-nal, prelim, or blank) and press [ENTER] to accept. Subsequent events shift to
new locations.
#001= EVT: 001
RND= FINAL *
To enter a new distance for this event #, press [ENTER]. Use [←][→] to change the
selection and press [ENTER] to accept. Now using the keypad, enter a new record time
(REC) and press [ENTER] to accept.
#001= EVT: 001
DISTANCE= ^200*
#001= EVT: 001
REC: 01:35.27 *
Entering a distance of “0” will insert a diving event. Instead of asking for a record time, it
will show the dive order (A, B, C, or D) set for that event.
#001= EVT: 001
DIVE ORDER= B
MENU-EVENT ORDER
2-INSERT EVENT
From Main Menu – [2]>[2]>[↓]
To Next Page
Loading...
