Daktronics OMNISPORT 2000 - Setup RTD;Matrix Scoreboard Menu

Swimming Mode Menus & Settings
53
Subtractive Splits
This setting congures the console to display only the
cumulative split or the rst subtractive split followed by the
cumulative split on the scoreboard. The default is NO.
SUBTRACTIVE
SHOW= NO *
From Main Menu – [4]>[3]>[1]>[5]
SUBTRACTIVE
SHOW= YES*
Use [←][→] to select YES or NO. If the timer is set to YES, the scoreboard shows subtractive
splits and then shows the cumulative splits. Press [ENTER] to save.
Note: It is important for the timer operator to explain this to coaches before the meet.
Show DQ
This menu congures what will show on the scoreboard when
there is a disqualication (DQ).
SHOW DQ
STATUS=DQ ONLY*
From Main Menu – [4]>[3]>[1]>[6]
SHOW DQ
STATUS=DQ/TIME*
Use [←][→] to select to display the DQ ONLY (in the TIME digits) or to display the DQ/TIME,
with “DQ” in the PLACE digits and the time in the TIME digits. Press [ENTER] to save.
Show Start
This menu tells the console whether or not to display the start
reaction time (from RTOPs) on a numeric scoreboard.
SHOW START
REACTION=NO *
From Main Menu – [4]>[3]>[1]>[7]
SHOW START
REACTION=YES*
Use [←][→] to select NO (do not show start reaction time) or YES (show start reaction
time) and then press [ENTER] to save.
Setup RTD/Matrix Scoreboard Menu
Number of Lines
This menu sets the # of Lines of lane data being sent to the
matrix display. If the number of lanes in the pool is greater
than the value set, the timer will automatically page the
information in place order. The default setting is 10.
# OF LINES
LINES= ^8
From Main Menu – [4]>[3]>[2]>[1]
Press the [0]–[9] keys to enter the number of lines appropriate to the facility’s display and
then press [ENTER] to save.
MENU-NUMERIC
5-SUBTRACTIVE
MENU-NUMERIC
6-SHOW DQ
MENU-NUMERIC
7-SHOW START
MENU-SCOREBOARD
2-RTD/MATRIX
MENU-RTD/MATRIX
1-# OF LINES
From Main Menu – [4]>[3]>[2]