Daktronics OMNISPORT 2000 - Menu Navigation

Diving Mode Operation, Menus, & Settings
67
When the Dive Order is not pre-programmed:
1� Press [SCORE] and the left and middle LCDs will prompt the user to enter dive and
position. Use the numeric keypad to enter the three- or four-digit dive number and
the [A], [B], [C], and [D] keys for the position. Press [ENTER] to accept the dive and
position.
2� Use the number pad to enter the DD for the dive selected, then press [ENTER]. The left
and middle LCDs then prompt the user for the judges’ scores.
Use the [0]–[10] scoring keys to ll in the judges’ scores. Press [FAIL] or [BALK] if they apply.
When the correct judges’ scores have been lled in, press [SCORE] to accept the
awarded score and advance to the next diver in that round. Repeat for each dive.
If that was the last diver for that round, press [→] to increment the round by one. Next,
press [DIVER •]>[1]>[ENTER]. Repeat the above steps until all dives and rounds are
completed.
Menu Navigation
Press [MENU] to access the Main Menu screen. The diving
mode has ve menus, described in following sections.
The operator may navigate through the menus using the arrow keys or by pressing the
number that precedes the menu title. To return to the main menu at any time, press
[MENU] twice.
• Use [↑][↓] to scroll through the menus. When a selection is made, press [ENTER] to
accept the menu displayed on the right LCD. Pressing an arrow is equivalent to using
a number when in menu mode.
• The second method uses numbers to go directly to a desired menu choice. Using
the [1]–[9] keys, enter the number sequence as shown on the OmniSport 2000 Timing
Console Quick Reference Guide (ED-13584). Daktronics provides a laminated
copy of the quick reference guide; keep it next to the console during a meet for
convenience.
Note: If the console is set in the swimming mode and the operator wants to change to
diving, either turn the console off and restart to select the new sport or select an
event in the Event Order that is congured for a diving event.
Each operator will nd his/her own method that works best. Remember that when using
either navigation method, pressing [CLEAR] at any time will go back to the previous
function or menu. Pressing the [YES] and [NO] keys is the same as [ENTER] and [CLEAR].
Note: In this manual, LCD illustrations aligned to the right indicate menu location while
the set-up actions are shown on the screens to the left. Each step is illustrated as
the console’s right LCD prompts. The keystrokes to get to the menu shown are
indicated below that menu.
Scoreboard Menu
In the Scoreboard Menu, the operator can turn the
scoreboard output ON or OFF, set the dimming (brightness)
level for Multi-drop displays, and display Time-of-Day on the
scoreboard.
MENU-MAIN
1-SCBD MENU
Main Menu Screen
MENU-SCOREBOARD
1-SCBD ON/OFF
From Main Menu – [1] or [ENTER]