Danfoss VLT AQUA Drive FC 202

Param-
eter #
Parameter description Default value 4 set-up Change during
operation
Conversion
index
Type
5-8* I/O Options
5-80 AHF Cap Reconnect Delay 25 s 2 set-ups TRUE 0 Uint16
5-9* Bus Controlled
5-90 Digital & Relay Bus Control 0 N/A All set-ups TRUE 0 Uint32
5-93 Pulse Out #27 Bus Control 0% All set-ups TRUE -2 N2
5-94 Pulse Out #27 Timeout Preset 0% 1 set-up TRUE -2 Uint16
5-95 Pulse Out #29 Bus Control 0% All set-ups TRUE -2 N2
5-96 Pulse Out #29 Timeout Preset 0% 1 set-up TRUE -2 Uint16
5-97 Pulse Out #X30/6 Bus Control 0% All set-ups TRUE -2 N2
5-98 Pulse Out #X30/6 Timeout Preset 0% 1 set-up TRUE -2 Uint16
Parameter Lists Programming Guide
MG20OB02 Danfoss A/S © 05/2018 All rights reserved. 257
4 4