4.1.16 18-** Info & Readouts
Param-
eter #
Parameter description Default value 4 set-up Change during
operation
Conversion
index
Type
18-0* Maintenance Log
18-00 Maintenance Log: Item 0 N/A All set-ups FALSE 0 Uint8
18-01 Maintenance Log: Action 0 N/A All set-ups FALSE 0 Uint8
18-02 Maintenance Log: Time 0 s All set-ups FALSE 0 Uint32
18-03 Maintenance Log: Date and Time ExpressionLimit All set-ups FALSE 0 TimeOfDay
18-3* Analog Readouts
18-30 Analog Input X42/1 0 N/A All set-ups FALSE -3 Int32
18-31 Analog Input X42/3 0 N/A All set-ups FALSE -3 Int32
18-32 Analog Input X42/5 0 N/A All set-ups FALSE -3 Int32
18-33 Analog Out X42/7 [V] 0 N/A All set-ups FALSE -3 Int16
18-34 Analog Out X42/9 [V] 0 N/A All set-ups FALSE -3 Int16
18-35 Analog Out X42/11 [V] 0 N/A All set-ups FALSE -3 Int16
18-36 Analog Input X48/2 [mA] 0 N/A All set-ups TRUE -3 Int32
18-37 Temp. Input X48/4 0 N/A All set-ups TRUE 0 Int16
18-38 Temp. Input X48/7 0 N/A All set-ups TRUE 0 Int16
18-39 Temp. Input X48/10 0 N/A All set-ups TRUE 0 Int16
18-5* Ref. & Feedb.
18-50 Sensorless Readout [unit] 0 SensorlessUnit All set-ups FALSE -3 Int32
18-6* Inputs & Outputs 2
18-60 Digital Input 2 0 N/A All set-ups TRUE 0 Uint16
18-7* Rectier Status
18-70 Mains Voltage 0 V All set-ups TRUE 0 Uint16
18-71 Mains Frequency 0 Hz All set-ups TRUE -1 Int16
18-72 Mains Imbalance 0% All set-ups TRUE -1 Uint16
18-75 Rectier DC Volt. 0 V All set-ups TRUE 0 Uint16
Parameter Lists Programming Guide
MG20OB02 Danfoss A/S © 05/2018 All rights reserved. 269
4 4
To Next Page
Loading...
Need help?
General