Contents
1 Introduction
4
1.1 Purpose of the Manual
4
1.2 Additional Resources
4
1.3 Software Version
4
1.4 Approvals
4
1.5 Symbols
4
1.6 Denitions
4
1.6.1 Frequency Converter 4
1.6.2 Input 4
1.6.3 Motor 4
1.6.4 References 5
1.6.5 Miscellaneous 5
1.7 Abbreviations, Symbols, and Conventions
7
1.8 Safety
7
1.9 Electrical Wiring
10
2 How to Program
13
2.1 The Graphical and Numerical Local Control Panel
13
2.2 How to Program on the Graphical LCP
13
2.2.1 The LCP Display 14
2.2.2 Quick Transfer of Parameter Settings between Multiple Frequency Converters 17
2.2.3 Display Mode 17
2.2.4 Display Mode - Selection of Readouts 17
2.2.5 Parameter Set-up 18
2.2.6 Quick Menu Key Functions 18
2.2.7 Quick Menu, Q3 Function Set-ups 19
2.2.8 Quick Menu, Q4 SmartStart 21
2.2.9 Main Menu Mode 21
2.2.10 Parameter Selection 21
2.2.11 Changing Data 21
2.2.12 Changing a Text Value 21
2.2.13 Changing a Data Value 22
2.2.14 Innitely Variable Change of Numeric Data Value 22
2.2.15 Value, Step by Step 22
2.2.16 Readout and Programming of Indexed Parameters 22
2.2.17 How to Program on the Numerical Local Control Panel 22
2.2.18 LCP Keys 24
3 Parameter Description
26
3.1 Parameter Selection
26
Contents Programming Guide
MG20OB02 Danfoss A/S © 05/2018 All rights reserved. 1
To Next Page
Loading...
Need help?
General