Param-
eter #
Parameter description Default value 4 set-up Change during
operation
Conversion
index
Type
6-7* Analog Output X45/1
6-70 Terminal X45/1 Output [0] No operation All set-ups TRUE - Uint8
6-71 Terminal X45/1 Min. Scale 0% All set-ups TRUE -2 Int16
6-72 Terminal X45/1 Max. Scale 100% All set-ups TRUE -2 Int16
6-73 Terminal X45/1 Bus Control 0% All set-ups TRUE -2 N2
6-74
Terminal X45/1 Output Timeout
Preset 0% 1 set-up TRUE -2 Uint16
6-8* Analog Output X45/3
6-80 Terminal X45/3 Output [0] No operation All set-ups TRUE - Uint8
6-81 Terminal X45/3 Min. Scale 0% All set-ups TRUE -2 Int16
6-82 Terminal X45/3 Max. Scale 100% All set-ups TRUE -2 Int16
6-83 Terminal X45/3 Bus Control 0% All set-ups TRUE -2 N2
6-84
Terminal X45/3 Output Timeout
Preset 0% 1 set-up TRUE -2 Uint16
Parameter Lists Programming Guide
MG20OB02 Danfoss A/S © 05/2018 All rights reserved. 259
4 4
To Next Page
Loading...
Need help?
General