Danfoss vlt FC 102 Programming Guide

0-38 Display Text 2
Range: Function:
0* [0 - 25 ] In this parameter, it is possible to
write an individual text string to be
shown in the LCP or to be read via
serial communication.
To show the text permanently,
select [38] Display Text 2 in:
•
Parameter 0-20 Display Line
1.1 Small.
•
Parameter 0-21 Display Line
1.2 Small.
•
Parameter 0-22 Display Line
1.3 Small.
•
Parameter 0-23 Display Line
2 Large.
•
Parameter 0-24 Display Line
3 Large.
Press [
▲
] or [
▼
] to change a
character. Press [
◀
] and [
▶
] to
move the cursor. When a character
is highlighted by the cursor, this
character can be changed. A
character can be inserted by
placing the cursor between 2
characters and pressing [
▲
] or [
▼
].
0-39 Display Text 3
Range: Function:
0* [0 - 25 ] In this parameter, it is possible to
write an individual text string to
show in the LCP or to be read via
serial communication. To show the
text permanently, select display text
3 in parameter 0-20 Display Line 1.1
Small, parameter 0-21 Display Line
1.2 Small, parameter 0-22 Display
Line 1.3 Small,
parameter 0-23 Display Line 2 Large,
or parameter 0-24 Display Line 3
Large. Press [
▲
] or [
▼
] to change a
character. Press [
◀
] and [
▶
] to
move the cursor. When a character
is highlighted by the cursor, this
character can be changed. A
character can be inserted by
placing the cursor between 2
characters and pressing [
▲
] or [
▼
].
3.2.8 0-4* LCP Keypad
Enable, disable, and password protect individual keys on
the LCP.
0-40 [Hand on] Key on LCP
Option: Function:
[0] Disabled Select to disable the key.
[1] * Enabled [Hand On] key is enabled.
[2] Password Avoid unauthorized start in hand-
on mode. If parameter 0-40 [Hand
on] Key on LCP is included in My
Personal Menu, dene the password
in parameter 0-65 Personal Menu
Password. Otherwise, dene the
password in parameter 0-60 Main
Menu Password.
[3] Enabled
without OFF
[4] Password
without OFF
[5] Enabled with
OFF
[6] Password with
OFF
[9] Enabled, ref =
0
0-41 [O] Key on LCP
Option: Function:
[0] Disabled Select to disable the key.
[1] * Enabled [O] key is enabled.
[2] Password Avoid unauthorized stop. If
parameter 0-41 [O] Key on LCP is
included in My Personal Menu,
dene the password in
parameter 0-65 Personal Menu
Password. Otherwise, dene the
password in parameter 0-60 Main
Menu Password.
0-42 [Auto on] Key on LCP
Option: Function:
[0] Disabled Select to disable the key.
[1] * Enabled [Auto On] key is enabled.
[2] Password Avoid unauthorized start in auto-on
mode. If parameter 0-42 [Auto on]
Key on LCP is included in My
Personal Menu, dene the password
in parameter 0-65 Personal Menu
Password. Otherwise, dene the
password in parameter 0-60 Main
Menu Password.
Parameter Descriptions
VLT
®
HVAC Drive FC 102
44 Danfoss A/S © 10/2019 All rights reserved. M0010001
33

Danfoss vlt FC 102 Specifications

General

Brand	Danfoss
Model	vlt FC 102
Category	DC Drives
Language	English