127
Appendix B - Embedded Fonts and Barcodes
Embedded Fonts
All character fonts available with the printer are described in this section. Each font has a
name associated with it for use in programming. Human-readable fonts have numeric names.
Fonts 0 through 8 use the slash zero (Ø) conventions for distinguishing between the zero and
the alphabetic O. The slash can be removed with the label formatting command z. These fonts
are non-proportional (monospaced): all of the characters take up the same amount of space
when printed.
The Triumvirate font number 9 is a proportional font; each character will take up a different
amount of space when printed.
Font Valid ASCII Characters (decimal) Use with Record Structure
Type
0 32-127,255
1 32-168, 171, 172, 225,255
2 32-168, 171, 172, 225,255
3 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153, 154, 156, 157, 165, 168, 225,255
4 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153, 154, 156, 157, 165, 168, 225,255
5 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153, 154, 156, 157, 165, 168, 225,255
6 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153, 154, 156, 157, 165, 168, 225,255
7 32-126
8 32, 48-57, 60, 62, 67, 69, 78, 83, 84, 88, 90
Internal
Bit-Mapped
Fonts
9 32-126, 128-169, 171-173, 181-184, 189, 190, 198, 199, 208-216, 222, 224-237, 241,
243, 246-250,255
Smooth Font
FONT HEIGHT WIDTH SPACING
Font 0 7 5 1
Font 1 13 7 2
Font 2 18 10 2
Font 3 27 14 2
Font 4 36 18 3
Font 5 52 18 3
Font 6 64 32 4
Font 7 32 15 5
Font 8 28 15 5
Font 0 96-character
alphanumeric, upper and lower
case.
Font 1 145-character upper and
lower case alphanumeric w/
descenders and ascenders.
To Next Page
Loading...
