100
Resetting the Printer
Depending upon the method used and the result desired, there are three different reset levels:
• Soft Reset -- Clears the printer of any temporary host settings. To execute a Soft
Reset, press and hold the CANCEL Key for approximately four seconds.
• Level One Reset -- Returns the factory default settings (and, if saved, restores the
Factory Setting File). To execute a Level One Reset, turn OFF the printer then press
and hold the PAUSE and CANCEL Keys while turning ON the printer and until the
READY message is displayed.
Note:
The Level 1 Reset has the same effect as the Set Factory Defaults menu selection.
• Level Two Reset -- Returns the factory default settings, clears calibrations, and custom
adjustments. To execute a Level Two Reset, turn OFF the printer then press and hold
the PAUSE, FEED, and CANCEL Keys while turning ON the printer and until the
UNCALIBRATED message is displayed.
Note:
The Level 2 Reset requires a media sensor calibration before printing can be
resumed.
To Next Page
Loading...
