Datamax H Class User Manual

31
Loading Ribbon
Ribbon is required with thermal transfer media. For convenience, the printer can use ‘coated
side in’ or ‘coated side out’ ribbon. Load ribbon as follows:
Note:
Use a ribbon that is slightly wider than your media (and liner, if any) to help protect the
printhead from abrasion.
1. Rotate the Printhead Latch in a counterclockwise direction then raise the Printhead
Assembly.

Datamax H Class Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Interface	Ethernet, Wireless
Media Sensor	Reflective
Media Types	Labels, Tags
Resolution	203 dpi
Media Thickness	0.002 to 0.01 inches (0.05 to 0.25 mm)