Important Safety Instructions
This printer has been carefully designed to provide years of safe, reliable performance. As with
all electrical equipment, there are a few basic precautions you should take to avoid hurting
yourself or damaging the printer:
> Carefully read the installation and operating instructions provided with your printer.
> Read and follow all warning instruction labels on the printer.
> Place the printer on a flat, firm, solid surface.
> To protect your printer from overheating, make sure all openings on the printer are not
blocked.
> Do not place the printer on or near a heat source.
> Do not use your printer near water, or spill liquid into it.
> Be certain that your power source matches the rating listed on your printer. If you are
unsure, check with your dealer or with your local power company.
> Do not place the power cord where it will be walked on. If the cord becomes damaged or
frayed replace it immediately.
> Do not insert anything into the ventilation slots or openings on the printer.
> Only qualified, trained service technicians should attempt to repair your printer.
To Next Page
Loading...
