60
APPLICATION
VERSION
Displays the version level, version number, and date of the application
firmware.
BOOT LOADER Displays the version level and date of the boot loader.
UPGRADE
PRINTER CODE
Upgrades the software feature level of the printer. (An authorization code
is required -- use the UP and DOWN Buttons to enter the alphanumeric
authorization code, use the LEFT and RIGHT Buttons to position the
cursor, and the ENTER Key to enter the number).
UNLOCK
FEATURE
Unlocks additional optional features within the printer. (An authorization
code is required -- use the UP and DOWN Buttons to enter the
alphanumeric unlock code, use the LEFT and RIGHT Buttons to position
the cursor, and the ENTER Key to enter the number).
Note:
This information is also provided on the Configuration Label.
SET FACTORY
DEFAULTS
Returns the current printer settings to the factory-programmed values
(except CUSTOM ADJUSTMENTS and calibrations) or, if selected, to the
Factory Setting File, where selecting YES at the prompt causes the
configuration to be restored.
FORMAT
ATTRIBUTES
Defines the manner in which overlapping text and graphics appear on the
label, where:
TRANSPARENT Intersecting text, images, and bar codes will be printed, for
example:
XOR Intersecting text, images, and bar codes will not be printed, for example:
(Default Setting)
OPAQUE Intersecting text, images, and bar codes will be printed by obliterating
those formatted first, for example:
LABEL
ROTATION
Allows the label format to be rotated 180 degrees before printing, where:
ENABLED Flips the formats.
DISABLED No format flipping occurs. (Default Setting)
To Next Page
Loading...
