72
Diagnostics
Within the Diagnostics branch, the following menu selections are available:
• Hex Dump Mode
• Options Testing
• Print Test Rate (min)
• Sensor Readings
• Ribbon Sensor Limits
• iPH Report
The menu selections are defined as follows:
DISPLAYED ITEM ITEM DESCRIPTION
HEX DUMP MODE
Determines how the printer handles the data received from a host, where:
ENABLE The printer outputs the raw ASCII data it receives without interpretation;
no processing occurs. (Click here to see an output format example.)
DISABLE The normal printer operating mode, received data is processed. (Default
Setting)
OPTIONS
TESTING
Performs printer option diagnostics and / or monitors and outputs test
results, as follows:
TEST PRESENT
SENSOR
Performs a functional test of the Present Sensor by indicating LABEL
PRESENTED (when a label blocks the sensor) and LABEL NOT
PRESENTED (when no label blocks the sensor). (Note that this test can
also be used to check the sensor function of the Peel & Present option.)
TEST CUTTER
Performs a functional test of the Cutter, where:
PERFORM TEST
001 TIMES
Cycles the cutter blade a selectable number of times (0 - 999), with PASS
/ FAIL results given for each cycling attempt.
TEST
REWINDER
Performs a functional test of the Powered Internal Rewinder, rotating it a
selected number of times (0 - 999) with PASS / FAIL results given for
each attempt, where:
Note:
Before starting this test, remove all label stock from the
rewinder.
PERFORM TEST
001 TIMES
Is the Default Setting.
To Next Page
Loading...
