74
PRINT SIGNAL
INFO
Prints a reference label (see sample below) containing GPIO signal
names, pin and port assignments, programmed settings, and current
signal states.
TEST SCANNER
Performs a functional test of the Linear Scanner, where:
ALIGNMENT
TEST
Enters “multiple read mode,” allowing bar codes to be continuously
scanned. A read-count is displayed and incremented for each decoded
symbology.
SCAN TEST Enters “single read mode,” allowing a bar code to scanned and decoded
once. The decoded results are displayed.
TEST RFID
Performs a functional test of the RFID option, where:
TAG DATA Reads the data encoded on the RFID chip.
DEVICE
VERSION
Displays the type and version of the printer's encoding device.
TAG ID - HF
ONLY
Reads and displays the High Frequency Tag ID number.
PRINT TEST
RATE (MIN)
Allows a label-to-label delay time (0 - 120 minutes) to be set when printing
a batch of Test labels, where:
000 Is the Default Setting.
To Next Page
Loading...
