EasyManuals Logo

Datamax I-Class Mark II Maintenance Manual

Datamax I-Class Mark II
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
24
I-Class Mark II Maintenance Manual
Ad
j
ustments and Maintenance
2.4.2 Cleaning the Platen
CAUTION
NEVER use a sharp object on the Platen.
A Platen contaminated with grit, label adhesive or ink can cause a decline in print quality and, in extreme
cases, cause labels to wrap the roller. Clean the Platen as follows:
1. Turn OFF and unplug the printer.
2. Open the cover. Raise the Printhead Assembly and remove the media.
3. Using a Cotton Swab (or lint-free cloth) dampened with isopropyl alcohol wipe the Platen, manually
rotating the roller until the entire surface is clean. Allow the Platen to dry.
Platen Roller
Cotton Swab
4. Install media then lower and latch the Printhead Assembly.
5. Close the cover. Plug in and turn ON the printer. Feed several labels to normalize tracking.

Other manuals for Datamax I-Class Mark II

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datamax I-Class Mark II and is the answer not in the manual?

Datamax I-Class Mark II Specifications

General IconGeneral
Power Supply100-240 VAC, 50-60 Hz
Print Resolution203 dpi
Print Width4.09 inches
Memory16 MB DRAM, 8 MB Flash
ConnectivityUSB, Serial, Ethernet
Media HandlingRoll-fed
Media Width1.0" – 4.65" (25.4 mm – 118 mm)
Media Thickness0.0025" – 0.010" (0.0635 mm – 0.254 mm)
Ribbon Width1.0" – 4.5" (25.4 mm – 114.3 mm)
Ribbon Length1968 feet (600 meters)
Print Speedup to 12 ips
Dimensions12.7" H x 12.6" W x 18.6" D (322.6 mm H x 320 mm W x 472.4 mm D)

Related product manuals