How to adjust volume in booth with Datasat Computer Hardware?
To adjust the volume in the booth with your Datasat Computer Hardware, touch the Monitor button to open the Monitor window, and then touch the + or – buttons to increase or decrease the monitor volume.
How to brighten the display on Datasat Computer Hardware AP20?
If the front panel display on your Datasat Computer Hardware AP20 is too dim, gently touch the display screen to brighten it.
What to do if the front panel fader is not functioning on my Datasat Computer Hardware?
When the front panel fader on your Datasat Computer Hardware is not functioning, use the touch screen workaround until the fader can be repaired, and contact your theater technician.
Details product warranty terms and limitations of Datasat Digital Entertainment's liability.
States copyright ownership and usage restrictions for the publication.
Explains the manual's structure and how to navigate its content effectively.
Covers day-to-day usage instructions for the AP20 Audio Processor.
Provides technical guidance for installing and configuring the AP20.
Contains supplementary technical details and diagrams for the AP20.
Details the capabilities and specifications of the AP20 audio processor.
Outlines the warranty terms for the AP20 hardware and software.
Lists essential safety guidelines for operating the AP20 apparatus.
Highlights specific warnings regarding power cords, rain, moisture, and grounding.
Covers fundamental day-to-day operations of the AP20 Audio Processor.
Describes the function of each control and indicator on the AP20's front panel.
Guides the user through the procedure for starting up the AP20 unit.
Details the main operational screen, its features, and access to functions.
Provides solutions for common operational problems encountered with the AP20.
Summarizes the key steps required for the AP20's installation and setup.
Details all the connectors and their functions on the AP20's rear panel.
Provides instructions for physically mounting the AP20 chassis in a rack.
Describes the concept of audio formats and how they are configured in the AP20.
Covers audio level adjustments and sound performance verification procedures.
Guides on how to define and name input channels for the AP20.
Details the process of aligning the audio chain using equalization techniques.
Covers final tuning steps, format copying, and multi-screen setup.
Provides a cross-reference table for various setup activities and their corresponding manual sections.
Details the options available on the main system setup screen.
Guides on how to update the AP20's operating system via network or USB.
Explains how to save and load AP20 configurations and diagnostic info via USB.
Details how to set up passwords to restrict access to AP20 functions.
Covers the management and creation of audio formats for the AP20.
Covers the setup and management of audio equalization (EQ) settings.
Explains how to configure channel names, routing, and delays for profiles.
Details how to set up audio routing and active crossovers for speaker systems.
Guides on setting and adjusting audio levels, including pink noise generation.
Covers network configuration, IP addressing, and connection settings.
Covers the setup and management of automation events and macros.
Provides recommendations for regular cleaning and upkeep of the AP20 unit.
Offers solutions for common problems and error messages encountered with the AP20.
Details the pin assignments for the DB25F automation GPIO connector.
Details the pin assignments for the HDMI connectors.
Shows pin assignments and standard channel mapping for digital audio inputs.
Lists pin assignments and channel mapping for analog audio outputs 1-8.
Illustrates wiring diagrams for digital audio connections to the AP20.
Shows wiring diagrams related to AP20 automation and control interfaces.
Presents a block diagram illustrating the internal signal flow of the AP20.
Details specifications for digital, analog, and microphone input signals.
Lists specifications for digital and analog audio outputs.
Details specifications for Dirac Live, 3rd Octave EQ, and Parametric EQ features.
Specifies physical dimensions, weight, and regulatory certifications.
Highlights differences in screens for the 8-channel AP20 version.
Guides on installing the H332 card to upgrade the AP20 to 16 channels.
Introduces the optional optical film card and its capabilities.
Provides instructions for installing the H338 card and checking software versions.
Details how to set up optical formats and input sources.
Covers the process of aligning projectors and AP20 settings for optical film playback.
Explains how to adjust optical gain levels for optimal signal.
Guides on using EQ to correct slit loss in the optical film path.
Details how to set up digital soundtrack input for cross-fading.
Provides instructions for linking two AP20 units together for synchronized operation.
General| Audio Channels | 16 |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Dimensions | 19" rack mount, 2U |
| Type | Audio Processor |
| Channels | 16 |
| Input Types | Analog, Digital |
| Output Types | Analog |
| Control Interface | RS-232, Ethernet |
| Audio Formats | PCM |
| Connectivity | Ethernet |
| Ports | HDMI |
| Operating System | Linux-based |
To Next Page
