LS10 Installation and Operating Guide Page 39
LS10 Installation & Operating Guide Document # 9301H66300 Ver. 1.01
Set Delays See 3.7 Delays, page 49.
Set Decoder Options See 3.8 Decoder, page 50.
Set up Base Management See 3.9 Bass Management Setup, page 52.
Set Front Panel LCD Screen
Appearance
See 3.10 System Setup, page 60.
Update LS10 System Software See 3.11 Update LS10 Software, page 62.
Save or Restore System Setup
on a USB drive
See 3.13 USB Save/Restore, page 65
Examine Log File See 3.14 LogFile, page 66.
View LS10 Software version
and other information
See 3.15 Info, page 67.
View Network Mode and IP
address
See 3.17 Network, page 69.
View Network Diagnostics
information
See 3.18 Network Diagnostics, page 70.
Set Passwords to restrict
access to Setup screens
See 3.19 Access Control, page 72.
Create and manage Automation
Macros
See 3.20 Automation Macros, page 73.
Create and manage Automation
Events
See 3.21 Automation Events, page 74.
Set up Automation Serial
control
See 3.22 Automation Serial Setup, page 77.
Verify Sound Performance Listen in listening room. See LS10 Playback Sound Check, page
78.
3.2 Using VNC to Access Setup Menus
A VNC client program must be used to access the LS10 setup menus. This requires a laptop or desktop
computer, tablet or similar device running a VNC client (such as UltraVNC Viewer). The LS10 and the
"computer" must be connected on the same network. The connection from the computer to the router may
be wired or wireless, but the connection from the router to the LS10 must be wired.
To Next Page
Loading...