Datasat LS10 - Auro 3 D Option

LS10 Installation and Operating Guide Page 24
LS10 Installation & Operating Guide Document # 9301H66300 Ver. 1.01
Table 2. Speaker Configurations
Speaker
Configuration
Button
1
Button 2 Button 3 Button 4 Button 5
2.0 Off Auro
2.1 Off Auro
3.1 Off DTS Neo:X Dolby PLII
4.1 Off DTS Neo:X Dolby PLII
5.1 Off DTS Neo:X Dolby PLII Auro
7.1 h Off DTS Neo:X Dolby PLII Dolby PLIIz
7.1 w Off DTS Neo:X Dolby PLII
9.1 hw Off DTS Neo:X Dolby PLII
7.1 Off DTS Neo:X Dolby PLIIx Auro
9.1h Off DTS Neo:X Dolby PLIIx Dolby PLIIz
9.1w Off DTS Neo:X Dolby PLIIx
11.1 hw Off DTS Neo:X Dolby PLIIx Dolby PLIIz
Auro 9.1 Off DTS Neo:X Dolby PLII Dolby PLIIz Auro
Auro 10.1 Off DTS Neo:X Dolby PLII Dolby PLIIz Auro
Auro 11.1 Off DTS Neo:X Dolby PLII Dolby PLIIz Auro
Auro 13.1 Off DTS Neo:X Dolby PLIIx Dolby PLIIz Auro
1.6.1 Auro 3D
®
Option
Select Auro-3D
®
to create an immersive sound experience using one of the Auro Speaker configurations.
When selected, the Auro processing works in one of two ways. Auro-encoded input signals, natively
recorded and/or mixed for an Auro-3D
®
configuration, will be decoded with the built-in Auro-Codec
®
Decoder. Alternatively, legacy content (standard stereo, surround and mono sources) are up-mixed using
the Auro-Matic
®
3D module.
Auro-3D
®
mode is available when:
• The Auro upgrade option is installed. (Installed options are listed in the Setup screen.)